MGKP (Serie)
Magnetic switch for continuous use at - 80 °C with up to 20 mm switching distance Materials completely designed for permanent use at - 80 °C Fast response thanks to high switching frequency (300 Hz at - 80 °C) Detection through non-magnetic materials such as plastic walls…
Extension Cables KS031-DS (Serie)
Extension cable for the connection between detector coil and amplifier Waterproof Interference-free
Extension Cables KS031-DS (Serie)
Dual plug-in cable KS031-DS cable to combine two detector coils For the use of two detector coils for the improved monitoring of wide belts or high bulk materials
MFK (Serie)
Filling level monitor for the reliable monitoring of the maximum or minimum filling level of fluids and bulk materials Detects numerous media with low DK value Non-sensitive to adhesion If the medium touches a frequency shift is triggered which generates a switching signal…
KPM (Serie)
Chemical-resistant assembly sleeve for KNK-Series Assembly sleeves are mounted in the tank - the sensors record the filling level through the assembly sleeve For the rapid replacement of the filling level switches during running operations without assembly effort For use…
KGMR (Serie)
Capacitive filling level monitor / filling level switch for the reliable monitoring of the maximum or minimum filling level of fluids or bulk materials Compact design with rugged G3/4 thread resistant to adhesion due to smooth rounded tip With PTFE housing For use in…
SD 500 (Serie)
Flow rate sensor without amplifier Robust housing from glass fibre reinforced PBT No parts protruding into the flow Design for connection to amplifier series SKM 500 Flow rate monitoring in cooling circuits with small pipe diameters Flow rate monitoring in the cooling…
SDI 850 (Serie)
Flow rate sensor with amplifier Magnetic-inductive measuring principle For conductive media Measuring range 40 l/min or 80 l/min Flow indication with bright red 3-digit 7 segment indication Set-up via buttons at the device
SDN 550 (Serie)
7 segment flow rate indication Standardised button programming Detection range from 1 to 10 l/min Can be used for water/glycol mixtures Flow and temperature monitoring
STA 400 (Serie)
Screw-in sensors for flow monitoring Housing from Hastelloy C-22 or C-276 Housing from titanium with metal/ceramic coating Connection to amplifier series 400 with switching or analogue output Flow monitoring in corrosive fluids Flow disruption monitoring as pump protection…