IGB factor 1 (Serie)
All metal switch Constant switching distance for all metals Switching distances up to 20 m
IDB factor 1 (Serie)
All metal switch Constant switching distance for all metals Switching distances up to 150 mm
IDA (Serie)
Analogue proximity sensors With current or voltage output Measuring range 0…30 mm Large switching distance For the distance measurement of metals in a hot environment For use in the metal processing For the double occupation control of sheet metal
MGKP (Serie)
Magnetic switch for continuous use at - 80 °C with up to 20 mm switching distance Materials completely designed for permanent use at - 80 °C Fast response thanks to high switching frequency (300 Hz at - 80 °C) Detection through non-magnetic materials such as plastic walls…
Magnet sensors (Family)
Magnetic sensors detect the magnetic field of a magnet attached to the target. Depending on the flux density of the magnet used, comparatively high switching distances can be achieved. They are suitable, for example, for detecting, counting or positioning transport…
Extension Cables KS031-DS (Serie)
Extension cable for the connection between detector coil and amplifier Waterproof Interference-free
Extension Cables KS031-DS (Serie)
Dual plug-in cable KS031-DS cable to combine two detector coils For the use of two detector coils for the improved monitoring of wide belts or high bulk materials
KS031-DS05
(Product)
Product ID: p81051
The KS031-DS
double-end cable connects in particular the detector coil with an extension
cable (watertight) that has on its opposite end a plug for connecting to the MDV…
or MU… amplifiers.
The KS031 special
connection cable is specially designed for use with the Series 3000 of metal
detectors. Due to its solid construction and polyurenthane sheath, it will not
generate any disturbances that could initiate an error signal in the amplifier.
KS031-DSXX Special length up to 50 m with plug connectors.
KS031-DS05
SDI 853/2 GAPP
(Product)
Product ID: P11323
- Flow rate sensor with amplifier
- Magnetic-inductive measuring principle
- For conductive media
Measuring range 40 l/min or 80 l/min
- Flow indication with bright red 3-digit 7 segment indication
-
Set-up via buttons at the device
0,2...80 l/min - 24 VDC - outputs PNP programable / pulse and analog 4...20 mA
SDI 853/2 GAPP
SDI 853/1 GAPP
(Product)
Product ID: P11322
- Flow rate sensor with amplifier
- Magnetic-inductive measuring principle
- For conductive media
Measuring range 40 l/min or 80 l/min
- Flow indication with bright red 3-digit 7 segment indication
-
Set-up via buttons at the device
0...40 l/min - 24 VDC - outputs PNP programable / pulse and analog 4...20 mA
SDI 853/1 GAPP