EGE-Elektronik Spezial-Sensoren GmbH - Special-Sensors for Automation

EGE SDN 550

Inline flow sensor with IO-Link for 3 to 60 l/min

• Inline sensor for measuring flow from 3 l / min
  to 60 l / min

• With IO-Link

• Compact solution for tamper-proof flow measurement
  in machines and plants

• Parameterisation with IO-Link takes places either
  via the PLC or via an IO-Link master module and a PC

Sensor specialist EGE provides an IO-Link programmable inline flow sensor for OEMs and machine builders who need a compact, tamper-proof solution for flow measurement in aqueous media. The SDN 552 GAPL inline sensor detects flow rates between 3 and 60 l/min. It has no display or configuration interface. Instead, parameters are set via IO-Link using the sensor's M12 connection, optionally via a PLC or via an IO-Link master module connecting the sensor to a PC/laptop. For this purpose, EGE supplies the IOL-Master-Set V1.1 including the required cables. Two terminals of the M12 connector can be configured as PNP, analog, or pulse outputs for transmitting measured values.
The IO-Link sensors can also be connected to any common bus system via the equivalent master modules. Based on the calorimetric measuring principle, the sensors feature no moving parts or impact areas in the conduit. Therefore, there can be no pressure loss. The wetted parts are made of 1.4571 stainless steel and FKM. The SDNC 550 line features IP 67 ingress protection. These sensors are pressure-proof up to 20 bar and suitable for media temperatures of 0 °C to +90 °C.

  Flow sensos SDN 552 GAPL (further information on request)

« tillbaka

powered by webEdition CMS