EGE-Elektronik Spezial-Sensoren GmbH - Special-Sensors for Automation

ATEX Gas Ex - Application

Sensors under ATEX for Gas-Ex
Flow sensors ST..
Sensors for the installation in Zone 0 or Zone 1.
Amplifiers SZA..
Amplifiers for flow controller and air flow controller certified for zone 0 / 1. They are installed outside the hazardous area.
Amplifier SS 400..
This amplifier for flow sensors are installed directly in zone 1 and can be adjusted and read on site.

Level controller KEAC
These capacitive sensors monitor the fill level of explosive fluids.
High temperature sensors KGFT...Ex
These sensors are designed to monitor the fill level of high-temperature media.
Series UFGS.. Ex
Optical flow controllers for fuels and other explosive media.
Amplifier SF3
Amplifier for the connection of Opto-Level Sensors and thermo-sensors; to install in zone 1.

Inductive sensors IGEX / IDEX
Sensors for detecting metals in the Ex area zone 0. Devices can be delivered in M12, M18 and M30. There are also configurations with diameters of 80 mm to 160 mm.
Amplifier EGE 90..
The amplifiers for inductive sensors are intended for rail mounting installation.

Lightning protection SBGX..
The lightning protection is placed between the sensor and the amplifier. Lightning overvoltage is discharged to ground.
Housing for screw terminals GK..
These terminal boxes make it possible to set up terminal clamping points in intrinsically safe and in not intrinsically safe electric circuits within zone 1. The boxes are manufactured with type “e” increased safety or type “i” intrinsic safety.
Housing for amplifier GAM..
The housing GAM with amplifiers is ready for mounting and use within zone 1 and serve to connect several optical or thermal fill level monitors.

« back to fundamentals

« back to overview

powered by webEdition CMS